Model HD-3.5-9-SS features an integral bag dump station that collects dust generated during manual mixer charging. Particles are drawn onto cartridge filters of the dust collector as nozzles within each filter alternately emit short blasts of air on a timed cycle.
Read More
The CM-16X4-SS model provides continuous, high-capacity mixing of bulk materials with or without liquid additions at low cost per volume of output. Powered by a half-horsepower motor, the mixer consists of a 16 in. diameter by 48 in. long cylindrical drum with fixed internal mixing flights that impart a back-flow mixing action free of dead spots. Uniform distribution of particles is typically attained in one to two minutes, equating to capacities of 85 to 42 cu. ft./hour.
Read More
The 700-THX-50-ARI Rotary Batch Mixer blends abrasive materials in one to three minutes with minimized wear or product degradation. With useable batch capacity of 50 cu. ft. or 4,000 lbs., it features abrasion-resistant steel material contact surfaces, internal mixing flights bearing easy-to-replace wear plates, and radial seals for dust-tight operation. The mixer achieves uniformity with equal efficiency from 100 percent to 15 percent of rated capacity, regardless of disparities in the bulk densities, particle sizes or flow characteristics of batch ingredients.
Read More